This combination does not exist.

    Contact Us


  • Pyrometer
  • Share :

     Infrared thermometer to measure heat loss

    The infrared thermometer BP21 is a reliable thermometer with a rapid sensing temperature sensor having a class 2 laser. The response time of the temperature sensor is 0.3 a and has a spectral sensitivity range of 8 to 14 µm. A 9V battery powers the thermometer. The thermometer measure over a broad range of -35  to +800 °C with an accuracy of ±2°C. It has a legible LCD monochrome backlit display. The thermometer has a class IP54 protection. 


    1. The infrared temperature is used to monitor the heating and air conditioning system. 

    2. It is used for calibration and control of temperature.

    3. It is used to detect insulation break down in the HVAC system.

    4. It is used to measure the heat loss and gain values.

    5. It is used to detect leaks in the furnace and ducts.

    6. It is used to monitor motor performance in electrical systems.

    7. It is used to assess the engine cooling system performance.

    8. It is used to measure temperature during boiler operations.

    9. It is used for detection of hot spots in electrical systems and panels.

    10. It is used to inspect food safety.

    11. It is used to oversee the food process temperature conditions.

    12. It is used to scan refrigerated display cases and cooling systems.

    13. It is used to inspect food trucks and food storages.

    14. It is used by the agriculture department to monitor the plant temperatures for stress.

    15.  It is used to monitor animal bedding to detect spoiling. 

    16. It is used to examine the mechanical equipment for hot spots to detect the impending failure.

    17. Electrical panels and circuit breakers are analyzed for hot spots using an infrared thermometer. 

    18. It is used to check heater or oven temperature.

    19. It is used for performing diagnostics in electrical circuit board manufacturing. 

    20. It is used to examine materials in the process of heating and cooling.


    1.  The infrared thermometer has a  non-contact surface temperature measurement feature. 

    2. It has a freely adjustable degree of emission from 0.1 to 1.0.

    3. The optical resolution of the thermometer is 12:1.

    4. The price-utility ratio is excellent.

    5. Measuring spot diameter display due to dual laser technology

    6. It displays maximum and minimum values.

    7. A backlit display is provided with the thermometer.

    8. It has an automatic power-off function.

    9. The thermometer design is based on German industrial design.

    10. It has a practice optimized design with a protected design patent.

    11. It gives highly precise readings.

    12. It is always ready for operation.

    13. It has a maximum or minimum value function.

    14. It has a hold function to freeze the measured data.

    15. Individual time can be programmed to the thermometer.


    1. The optical resolution of the thermometer is 12:1. 

    2. The temperature resolution of the thermometer is 0.1°C. 

    3. The measuring temperature range varies from -35  to +800 °C. 

    4. It has a maximum accuracy of  ±2°C of the measured temperature.

    5. The infrared measuring range varies from -31 to 1472°F.

    6. The infrared measuring accuracy ranges vary from 4.5 to 1.8 °F.

    7. The operating temperature of the thermometer is 0 to 50°C.

    8. The storage temperature varies from -20 to 60°C.

    9. The operating relative humidity varies from10 to 80 %RH.

    10. It is provided with a monochrome LCD display.

    11. It has a continuous measuring function.

    12. It has a class IP54 protection.

    13. The response time of the temperature sensor is 0.3 s. 

    14. The spectral sensitivity of the sensor is 8 to 14 µm.

    15. The laser is classified as a class 2 laser.

    16. The wavelength of the laser is 630 to 670nm.

    17. The laser has an output power of 1mW.

    18. The thermometer weights 177 g.

    19. The dimension of the thermometer is 150 X 45 X 108 mm.

    20. The housing material of the thermometer is plastic.

    21. It is powered by a 9V block battery.

    22. It has an automatic power-off function activated after 8s inactivity.

    23. It has a minimum and maximum value display and hold function.

    We supply these infrared thermometers for monitoring performance of the engine cooling system in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply these infrared thermometers to monitor heating and air conditioning system in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.

    Our African offices supply these infrared thermometers for HVAC performance monitoring across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.

    Our Middle East offices supply these infrared thermometers to detect leaks in furnace and ducts in the United Arab Emirates, Kingdom of Saudi Arabia, Qatar, Oman, Kuwait, Egypt, Lebanon, Bahrain, Libya, Iraq, Erbil, Jordan, etc.

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products

    To install this Web App in your iPhone/iPad press and then Add to Home Screen.