FloClean Sanitary Turbine Flow Meter

VSKU:


FloClean Sanitary Turbine Flow Meter model no [VAC- FloClean-Sanitary- Turbine- Flow- Meter]

Size 3/8 to 2 in.
Temperature Range -150 to 300 °F
Flow Range 0.6 to 400 gpm
Pressure Range Up to 2220 PSI
Accuracy ±1 %


    Introduction

    FloClean Sanitary Turbine Flow Meter provides precision measurements while being resistant to most chemicals. It is made with wear-resistant moving parts for good operation and for long service life. For best accuracy and repeatability it is constructed with durable 316L stainless steel. This meter delivers accurate, consistent, reliable, and informative flow measurements for both liquid and gas applications. It provides a cost-effective solution for turbine flow meter applications. These equipment are easy to repair. Higher calibrations can be achieved for a specific viscosity.

    The fluid that is entering the meter passes through the inlet flow straightener, which reduces its turbulent flow pattern and improves the fluid’s velocity profile. The fluid then passes through the turbine, causing it to rotate at a speed proportional to the fluid velocity. As each turbine blade passes through the magnetic field, the blade generates an AC voltage pulse in the pickup coil at the base of the magnetic pickup. These pulses produce an output frequency proportional to the volumetric flow through the meter. The output frequency represents the flow rate and/or totalization of fluid passing through the turbine flow meter.

     Applications of FloClean Sanitary Turbine Flow Meter model no [VAC FloClean- Sanitary-Turbine- Flow- Meter]

    1.   It can be used in sanitary applications.

    2.   It can be used in food processing.

    3.   It can be used in pharmaceuticals.

     Features of FloClean Sanitary Turbine Flow Meter model no [VAC FloClean- Sanitary-Turbine- Flow- Meter]

    1.  It meets the requirements of 3-A Sanitary Standard number 28-04

    2.  It is made with a 316L stainless steel body and internal wetted parts, with a nickel-plated CD4MCU stainless steel turbine and tungsten carbide rotor shaft

    3.  It provides reliable, consistent gas flow measurement.

    4. Wafer mounting configuration is available for limited space requirements.

    Specifications of  FloClean Sanitary Turbine Flow Meter model no [VAC FloClean- Sanitary-Turbine- Flow- Meter]

    • Its size can range from 3/8 to 2 in.

    •  Its working temperature range is -150 to 300 °F 

    •  The flow range is 0.6 to 400 GPM 

    • The pressure range is Up to 2220 PSI. 

    • The accuracy is ±1 %

    We supply FloClean Sanitary Turbine Flow Meter that can be used in various industries and applications in the United Arab Emirates. Contact us for this FloClean Sanitary Turbine Flow Meter in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman &  Fujairah too.