HWG-WLD

VSKU:


model no [VAC- wld]
Ethernet: RJ45 (100BASE-T) (PoE version IEEE 802.3af) 
Water flood detector: 2 m (6.5 ft) leader cable +2 m (1.3 ft) sensing cable
M2M communication protocols:  SNMP, XML, Box-2-Box
WEB: Built-in web server
Online portal: SensDesk.com(Free online portal)


HWG-WLD 2D SURFACE WATER LEAK DETECTOR

HWg-WLD is a device which is network enabled water leak detector with a water absorbing and sensing cable. HWg WLD have a built in web server which is supported by the SNMP. It also send a email alert to wter flooding. HWg-WLD can be remotely control from anywhere. It also can control a relay output over the network. Here relay is switched when a water leak is detected along the sensing cable. Hwg-WLD also have a capability to detect the water leaks or water floods aling the entire length of the sensing cable. The sensing cable detects the smallest volume of water. Hwg-Wld can be ordered in two versions. It is depend on the supply of the power.

HWg-WLD is a device that detects water leak which is connected to the Ethernet. The sensing cable of the HWg-WLS detects as little as a few drops liquid. This also can be used to detect condensation. At the time of liquid detection the device automatically sends an email or a SNMP Trap or it used a central SMS gateway to send a text message.

By providing an early detection and warning this device can prevent the damages and also could reduce the associated cost.

HWg-WLD is configured using a built in web server. The device can be monitored and observed remotely over the internet. 

HWg-WLD can control the relay outputs over the network. It does not need additional software.


Applications

  1. It supports any Poseidon or Damocles unit.

  2. Its state is transferred upon the changes as well as periodically. The default period is 30s. It uses XML over http.

  3. The output must be in manual mode. There is no need for activating the output.

  4. The user could configure the remote device IP and port and the remote output ID.

  5. The user sets the password for controlling the relay if the relay is protected with a password.

  6. The output control can be tested with the Test button.

Features

  1. It is connected with long sensing cable that can be extended using sensing as well as non sensing segments

  2. The sensing cable also can be freely bent, that can be twisted or even knotted. It also can be pressed or slightly pinched without raising a false alarm.

  3. It uses M2M communication protocols like SNMP, XML and Box-2-Box that allow integration into more complex monitoring systems. 

  4. It is connected through LAN and configured via built-in server.

  5. The detection cable could monitor even a smallest volume of electrically conductive liquids. 

  6. The detected liquid leak and a sensing cable disconnection sends an alert email.

  7. It uses RJ45 (100BASE-T). It consist of power over Ethernet(PoE)version.

Specifications

  1. It consists of RJ45 Ethernet.

  2. It has a built-in web server.

  3. It has a water flood detector that is 2 m leader cable +2 m sensing cable.

  4. It is supported by software :

  • Configuration:UDP config (Ip address configuration and detection with DHCP)

  • HWg-PD Trigger: It controls IP devices and redirects alarms to SMS.

  • HWg-PDMS: It is used for logging of values, graphs, export to MS Excel and reports.

  • CapTemp: It is used for visualization on a map and control of outputs as well as alarm redirection to SMS

  • It uses third party SNMP software.

We supply this HWg-WLD VAC- wld which is a device which is network enabled water leak detector with a water absorbing and sensing cable in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden and other European countries. Also, we supply these HWg-WLD VAC- wld which is a device which is network enabled water leak detector with a water absorbing and sensing cable in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc. Our African offices supply these HWg-WLD VAC- wld which  is a device which is network enabled water leak detector with a water absorbing and sensing cable across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.

Our Middle East offices supply these HWg-WLD VAC- wld which is a device which is network enabled water leak detector with a water absorbing and sensing cable in the United ArabEmirates, Kingdom of Saudi Arabia, Qatar, Oman, Kuwait, Egypt, Lebanon, Bahrain, Syria, Libya, Iraq, Erbil, Jordan, etc.