Material Moisture Measuring Device T660

VSKU: 1010000040


Material Moisture Measuring Device T660
Material moisture [%]
Measuring principle Capacitive
Min. measuring range [%] 0
Max. measuring range [%] 7.6
Accuracy [%] ± ±0.1 %
Material moisture [digits]
Min. measuring range [Digit] 1
Max. measuring range [Digit] 200
Accuracy 0.1
Resolution [Digit] 0.1
Measuring principle Capacitive
Max. penetration depth (non-destructive) [mm] 40
Display
LCD
Device control
Touch key display
Housing design
Plastic
Power supply
Internal (battery) 4 x 1.5V, AA
Weight: 285g


Moisture measuring device to monitor the building moisture

The material moisture measuring device is built with a high contrast display glass and time-saving alarm function which uses microwave method for material moisture measurement. MutliMeasure Studio software is also included along with the measuring device for the development and visualization of grid measurements. The device with non-destructive near-surface measurements is capable of measuring volume moisture values about 4cm of the material.

 

Applications of Moisture measuring device, Model no. VAC-T660 :

  1. It is used to regulate the moisture in cabinets.   

  2. It is used to measure wood moisture in sawn timber.  

  3. It is used in selecting the suitable dry wood for the intended purpose.   

  4. It is used to identify suitable firewood.   

  5. It is used in quality control of forestry wood.       

  6. It is used to measure moisture in wooden beams.  

  7. It helps to determine whether the wood is suitable for use.       

  8. It is used to measure moisture content in rolled products.   

  9. It is used to examine the quality of furniture and lumber.   

  10. It is used to assess the moisture content of hardwood flooring.  

  11. It is used to assess the plywood moisture.     

  12. It is used to check the condition of window frames.     

  13. It is used in the regulating humidity for production of construction materials.     

  14. It is used to measure the moisture content in ceramic tiles.

  15. It is used to measure the amount of moisture absorbed by a ceramic brick or a lime-sand brick.    

  16. The moisture meter aids in planning a project design that accommodates dimensional variation caused by changes in relative humidity.    

  17. It is used for measuring moisture in dry packs for construction.     

  18. It is used to measure the quality of concrete and products from fortified concrete.   

  19. It is used to measure the moisture content in soft building materials like gypsum, plaster or screed.

Features of Moisture measuring device, Model no. VAC-T660 :

  1. The measuring device is designed and abides to the highest quality standards in Germany.  

  2. It is produced according to German industrial design standards. 

  3. The measuring device is robust with premium two-component construction.  

  4. It has a class IP54 protection.  

  5. It has a continuous and easy-to-clean glass surface for high-contrast display of measured values.  

  6. The glass surface is a highly scratch-resistant Planview special glass.  

  7. The glass surface provides high contrast display even at intense incidence of light.  

  8. It is provided with a capacitive touchscreen control panel. 

  9. It has a high-resolution colour display to simultaneously indicate the two measured values. 

  10. It is modelled for quick and non-destructive sub-surface measurements. 

  11. It has a moisture alarm function. 

  12. It allows a material pre-selection function for anhydrite and cementitious screed material.

  13. The measured values are directly displayed in mass % or CM %. 

  14. A grid measurement function is provided with active software connection. 

  15. The measuring device is aided by a MultiMeasure Studio measurement data management software. 

  16. It can instantly detect reliable values of the moisture distribution in-wall or floor areas using a large-digit and real-time measurement value display. 

  17. The measuring device is handy and time-saving.

Specifications of Moisture measuring device, Model no. VAC-T660 :

  1. The measuring principle used for the measurement of values is capacitive.

  2. The minimum value of the material moisture measuring range is 0 %.

  3. The maximum value of the material moisture measuring range is 7.6 %.

  4. The accuracy of the measured value of material moisture is ±0.1%.

  5. The maximum penetration depth of the measurement is 40mm.

  6. The minimum value of the material moisture measuring range is 1 digit

  7. The maximum value of the material moisture measuring range is 200 digits.

  8. The accuracy of the measured value of material moisture is 0.1.

  9. The resolution of material moisture is 0.1 digits.

  10. The device control is through touch key display.

  11. It is provided with an LCD display.

  12. The measuring value of operating temperature range has a minimum value of 0 °C.

  13. The measuring value of operating temperature range has a maximum value of 50 °C.

  14. The measuring value of the storage temperature range has a minimum value of -20 °C.

  15. The measuring value of the storage temperature range has a maximum value of 60 °C.

  16. The maximum value of the operating relative humidity is 95%RH.

  17. The maximum value of the storage relative humidity is  %RH.

  18. It is powered by  4 AAA 1.5V batteries 

  19. It has a battery life greater than 30 hours.

  20. The housing material of the device is plastic.

  21. It has a dimension of 209 x 63 x 35 mm.

  22. The weight of the device is 285g.

  23. An automatic power-off function is provided.

We supply these moisture measuring devices used for air quality control in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply these moisture measuring devices used for particle concentration, indoor air temperature and relative humidity measurement in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.

Our African offices supply these moisture measuring devices air quality monitoring across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.

Our Middle East offices supply these Moisture measuring devices to assess the moisture content of hardwood flooring in the United Arab Emirates, Kingdom of Saudi Arabia, Qatar, Oman, Kuwait, Egypt, Lebanon, Bahrain, Libya, Iraq, Erbil, Jordan, etc.