Model 1200 In-line Turbine Flow Meter

VSKU:


Model 1200 In-line Turbine Flow Meter model no [VAC Model- 1200- In-line- Turbine- Flow- Meter]

Size 1/4 to 3/4 in.
Temperature Range –60 to 350 °F
Flow Range 0.25 to 25 gpm
Pressure Range Up to 4,000 PSI
Accuracy ±1.0 %


    Introduction

    Model 1200 In-line Turbine Flow Meter is used in applications having a highly corrosive environment.  It is used to measure liquid chemical flow and provides accuracy and durability. The meter is made with a 303 stainless steel body and internal wetted parts, with two type-440 stainless steel ball bearings. It is made with wear-resistant moving parts for good operation and for long service life. These equipment are easy to repair. Higher calibrations can be achieved for a specific viscosity. When fluid passes through the inlet flow conditioner it reduces its turbulent flow pattern and improves the fluid’s velocity profile. The fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to the fluid velocity. As each turbine blade passes through the magnetic field, the blade generates an AC voltage pulse in the pickup coil at the base of the magnetic pickup. These pulses produce an output frequency proportional to the volumetric flow through the meter. The output frequency represents the flow rate and/or totalization of fluid passing through the turbine flow meter.

     Applications of Model 1200 In-line Turbine Flow Meter model no [VAC Model- 1200- In-line- Turbine- Flow- Meter]

    1.  It can be used in petrochemical industries.

    2.  It can be used in refining industries.

    3.  It can be used in chemical metering.

     Features of Model 1200 In-line Turbine Flow Meter model no [VAC Model- 1200- In-line- Turbine- Flow- Meter]

    1.   The meter is made with a 303 stainless steel body and internal wetted parts, with two type-440 stainless steel ball bearings.

    2.   It uses NIST traceable calibration

    3.   It integrates electronically with B2800 flow Monito

    Specifications of Model 1200 In-line Turbine Flow Meter model no [VAC Model- 1200- In-line- Turbine- Flow- Meter]

    • Its size can range from ¼ to 3/4 in.

    •  Its working temperature range is -60 to 350 °F. 

    • The flow range is 0.25 to 25 GPM. 

    • The pressure range is Up to 4000 PSI. 

    • The accuracy is ±1 % 

    We supply Model 1200 In-line Turbine Flow Meter that can be used in various industries and applications in the United Arab Emirates. Contact us for this Model 1200 In-line Turbine Flow Meter in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman &  Fujairah too.