Product Image

CPS 6041 Advanced System – Slave panel

CPS 6041 Advanced System – Slave panel

CPS 6041 Advanced System model no [VAC- cps-6041-advanced -system- slave -panel]
Output : Optional Relay – 24 VAC/DC 1A max

Yearly drift typical: Depending on attached sensor

Accuracy typical: Depending on attached sensor

Units: Pascal

Measuring device: FlowGuard 6280

Applications: Operating rooms, Pharmacies, Laboratories

Power: 24 V DC @ 54 mA/ CPS 6041

Measurement on the wall box: 150x100x40 mm

Measurement recessed box: 114x90x40 mm

Communication external: RS485 Modbus RTU

Color: Standard white *

Display: 65×49 mm Display, LCD Touchscreen

Dimension: 150x100x5 (45 Mounting box) mm

Montage – Wall Mount: Flush-mounting / optional on the wall where wall doesn’t allow for flush mounting

Model: CPS 6041 Slave panel



    This combination does not exist.

    Contact Us

    The System 6041 is a unique system i.e. Slave Panel

    The System 6041 is one of the unique systems which are flexible and very easy to use. It is a Slave panel.

    The device is an advanced monitor system for up to 4 rooms. It can be used in hospitals process where you need to have an easy access to see information on the important parameters for your operation and the process. The device can handle various sensors like Gases, humidity, air flow, air changes, temp particles and barometer. Etc.

    The device can monitor positive or negative pressure.

    The device CPS 6041 operates in a dual room mode. It can be used in the room where we need to know the room pressure such as positive which can protect the products or a patient. It also can be used in a room for negative pressure which can protect the surroundings from smell, dust particles, bacteria or a sick patient.  Thus device can monitor both positive and a negative pressure of the room.

    The device is a dynamic

    The CPS 6041 is flexible and very easy to use for the staffs. The device can monitor and present the alarms (up to 4 units) for four different rooms at the same time. If you have a side room or an ante-room it can be observed as well. When it is used in the surrounding rooms you have panels in these rooms as well i.e. Slave panels so you always us status and alarms in all the important working areas.  To one master panel you can add up to 10 slave panels. The slaves can be configured which make the device even more dynamic.  

    The device is safe. 

    The concept of the device is simple so it is safe. The CPS system display green when everything is OK and it display red when there is an alarm condition. PSIDAC which combine with the high accuracy sensors will assure a safe working environment. The CPS system will give you a positive profiling and sales argument.  It monitor the processes 24/7 start informing the clients and customers for everyone safety.

    The device is very cheaper for the installation

    The device use smart sensors and digital Modbus communication. Hence it is low in installation cost and easy start-up compared to traditional analog systems. The device is easy to add rooms or slave panels after installation since the system is based on advanced programming. 

    The device communication.

    The CPS 6041 device can communicates to the Building Management System i.e. BMS or it can communicate SCADA-system so the measured parameters can be logged for the history and trends. BMS can send an alarm as an email and SMS cell phones for the fast response by staff or service to minimize stop and costs. 

    Device for the nurse station

    It is added to the Nurse Station NS10 which collects and shows the status of maximum 10 CPS/rooms. The NS20 which show max 20 CPS systems or rooms in the reception or staff lunchroom etc.

    Specification of the CPS System 6041

    1. It can be used to monitor positive or negative pressure.

    2. It is a good communication.

    3. The device is dynamic.

    4. The device is safe to use.

    5. The device is use for the nurse station.

    Features of the CPS System 6041

    1. It can be continually measure the air pressure.

    2. It is simple to understand. Green for correct pressure, yellow for warning and red for alarm.

    3. It can be used up to 2 rooms which can be monitored by one system.

    4. It use slave panels for flexible mounting.

    5. It is a non leak sensor.

    6. It is easy to change between isolation room and clean room and simple to upgrade.

    7. It is slim in design. 

    Applications  of CPS System 6041

    1. It can be use in operating rooms.

    2. It can be use in pharmacies.

    3. It can be use in laboratories. 

    We supply this CPS System 6041 in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden and other European countries. Also, we supply these CPS System 6041 model no. VAC- cps-6041- advanced -system- slave -panel in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc. Our African offices supply these CPS System 6041 model no VAC- cps-6041-advanced -system- slave -panel all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.

    Our Middle East offices supply these CPS System 6041 in the United Arab Emirates, Kingdom of Saudi Arabia, Qatar, Oman, Kuwait, Egypt, Lebanon, Bahrain, Libya, Iraq, Erbil, Jordan, etc.

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products

    To install this Web App in your iPhone/iPad press and then Add to Home Screen.