Moisture measuring device, Model no. VAC-T610
Material moisture measuring device, Model no. VAC – T610
Measurement range: 1 to 200 digits
Accuracy: 0.1 digit
Battery: 4 AAA 1.5V
Weight: 425g
VSKU:
This product is no longer available.
Moisture measuring device to measure the plywood moisture
The material moisture measuring device uses a high contrast display glass and time-saving alarm function which uses microwave method for material moisture measurement. MutliMeasure Studio software is also included along with the measuring device for the development and visualization of grid measurements. The device with non-destructive sub-surface measurements is capable of measuring volume moisture values up to a 30cm depth.
Applications of the Moisture measuring device, Model no. VAC-T610 :
It is used to regulate the moisture in cabinets.
It is used to measure moisture in wooden beams.
It helps to determine whether the wood is suitable for use.
It is used to measure moisture content in rolled products.
It is used to measure the moisture content in ceramic tiles.
It is used to identify suitable firewood.
It is used in quality control of forestry wood.
It is used to inspect the quality of furniture and lumber.
It is used to measure wood moisture in sawn timber.
It is used in selecting the suitable dry wood for the intended purpose.
It is used to analyze the moisture content of hardwood flooring.
It is used to measure the plywood moisture.
It is used to check the condition of window frames.
It is used in the regulating humidity for production of construction materials.
It is used to assess the amount of moisture absorbed by a ceramic brick or a lime-sand brick.
The moisture meter assists in planning a project design that accommodates dimensional variation caused by changes in relative humidity.
It is used for measuring moisture in dry packs for construction.
It is used to assess the quality of concrete and products from fortified concrete.
It is used to assess the moisture content in soft building materials like gypsum, plaster or screed.
Features of the Moisture measuring device, Model no. VAC-T610 :
The measuring device is designed and abides by the highest quality standards in Germany.
It is produced according to German industrial design standards.
The measuring device is robust with premium two-component construction.
It has a class IP54 protection.
It has a continuous and easy-to-clean glass surface for high-contrast display of measured values.
The glass surface is a highly scratch-resistant Planview special glass.
The glass surface provides high contrast display even at intense incidence of light.
It is provided with a capacitive touchscreen control panel.
It has a high-resolution colour display to simultaneously indicate the two measured values.
It is modelled for quick and non-destructive sub-surface measurements.
It has an integrated alarm function.
It has a unique report generating function to create professional measurement reports.
A grid measurement function is provided with active software connection.
The measuring device is aided by a MultiMeasure Studio measurement data management software.
It can instantly detect reliable values of the moisture distribution in-wall or floor areas using a large-digit and real-time measurement value display.
The measuring device is handy and time-saving.
An acoustic alarm signal is emitted automatically when the measured values exceed the permitted limits.
The focus can be exclusively fixed on the measuring object without the need for permanent observation of the displayed measuring result.
The antenna feature in the microwave enables non-destructive penetration depths of up to approximately 30 cm.
Specifications of the Moisture measuring device, Model no. VAC-T610 :
The microwave measuring principle is used in the measuring device.
The minimum value of the material moisture measuring range is 1digit.
The maximum value of the material moisture measuring range is 200 digits.
The accuracy of the measured value of material moisture is 0.1.
The resolution of material moisture is 0.1 digits.
The maximum penetration depth of the measuring device is 300mm.
The device is controlled through a touch key display.
It is provided with an LCD display.
The measuring value of operating temperature range has a minimum value of 0 °C.
The measuring value of operating temperature range has a maximum value of 50 °C.
The measuring value of the storage temperature range has a minimum value of -20 °C.
The measuring value of the storage temperature range has a maximum value of 60 °C.
The maximum value of the operating relative humidity is 90%RH.
The maximum value of the storage relative humidity is 95%RH.
It is powered by 4 AAA 1.5V batteries.
The housing material of the device is plastic.
It has a dimension of 191 x 65 x 65 mm.
The weight of the device is 425g.
An automatic power-off function is provided.
We supply these moisture measuring devices to regulate humidity for the production of construction materials in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply these moisture measuring devices to assess the amount of moisture absorbed by a ceramic brick or a lime-sand brick in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.
Our African offices supply these moisture measuring devices to analyze the moisture content of hardwood flooring across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.
Our Middle East offices supply these moisture measuring devices to select the suitable dry wood for the intended purpose in the United Arab Emirates, Kingdom of Saudi Arabia, Qatar, Oman, Kuwait, Egypt, Lebanon, Bahrain, Libya, Iraq, Erbil, Jordan, etc.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
