COIN® Wedge Wafer (Model NW) Flow Meter
COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]
Size 1/2 to 4 in.
Temperature Range Up to 800 °F
Pressure Range Dependent on flange rating PSI
Accuracy (uncalibrated) ±3 %(calibrated) ±0.5 %
VSKU:
Introduction
This flow meter can be used in various applications. Its design can provide better accuracy and reliability. Its operation is very simple and easy. It has the ability to maintain the necessary square root relationship between flow rate and differential pressure for almost any type of flow. Even viscosities up to 3,000 centipoises do not affect the accuracy of the meter. The flow coefficient stays highly predictable down to the remarkably low Reynolds number of 300. It is ideal for traditionally difficult-to-meter applications such as fuel oil, wastewater, coal tar, iron ores, black liquor, and others.
Applications of COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]
It can be used in a process or industrial
It can be used in refining industries
It can be used in chemical metering
Features of COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]
It has narrow face-to-face that affords the lowest installed cost with low-pressure losses
It has reduced pumping costs
It can resist wear and is maintenance-free(no moving parts)
It can be easily installed in any position with minimal straight pipe requirements
Its turndown ratio is 10:1
Its mass flow output with multivariable transmitter(accuracy ±0.5 calibrated)
Its repeatability ±0.2 of readings
Its Reynolds number measurement is down to 300
Its high viscosity measurement is 3000 and higher
It resists wears having no moving parts
It has bi-directional flow measurement
It can be easily installed in any position with minimal straight pipe requirements
It is manufactured to ASME, ANSI B31.1, NACE MR-0175, CSA-Z299.3
It has ISO-9001 certified design and fabrication
It has optional RTD
Specifications of COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]
Its size is 1/2 to 4 in.
Its working temperature range is Up to 800 °F
Its pressure range is Dependent on flange rating PSI
Its accuracy is (uncalibrated) ±3 %, (calibrated) Up to ±0.5 %
We supply this COIN® Wedge Wafer (Model NW) Flow Meter that can be used in various industries and applications in the United Arab Emirates. Contact us for this COIN® Wedge Wafer (Model NW) Flow Meter in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman & Fujairah too.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
