True

USD USD
0
0
  1. Series 4000 Flow Sensor
Product Image

Series 4000 Flow Sensor

Add to Cart Buy Now
Series 4000 Flow Sensor

Series 4000 Flow Sensor

Series 4000 Flow Sensor model no [VAC- Series- 4000- Flow Sensor]

Size 1/2 to 1 in.
Temperature Range Up to 220 °F
Flow Range 0.25 to 20 ft/sec
Pressure Range Up to 350 PSI
Accuracy ±0.5 %

Days
Hours
Mins
Secs
1

VSKU:

    This combination does not exist.

    Contact Us

    Introduction

    The Sensor is available in 1/2 in. (12.70 mm), 3/4 in. (19.05 mm) and 1 in. (25.40 mm) pipe sizes, and a wide range of pressure and temperature specifications. It has a molded housing, rotating impeller, and externally mounted electronics housing using nonmagnetic sensing technology. The closed, six-bladed impeller design provides higher and more constant torque than four-bladed designs and is less prone to fouling by waterborne debris. The shape of the impeller and the absence of magnetic drag provide improved operation and repeatability even at low flow rates. The housing design allows the impeller, bearings, shaft, or O-rings to be cleaned or replaced without removing the sensor from the piping system. Two signal output options are available. One option is a square wave frequency proportional to the flow rate. Power for the circuit is provided by an external source through a three-wire shielded cable. An internal preamplifier allows the signal to travel a maximum of 2000 ft (609 m) without amplification, and 20 ft (6 m) of three-conductor cable is included. The second output option is a 4…20 mA current analog signal. Power is provided by the two-wire loop so the distance from the receiver is a function of power supply voltage and wire resistance. A maximum of 30 in. (762 mm) the connector cable is included. Sensors of similar types are interchangeable, so there is no need for recalibration after servicing or replacement.

    Applications of Series 4000 Flow Sensor model no [VAC- Series- 4000- Flow Sensor]

    1.   It can be used in petrochemical

    2.   It can be used in refining

    3.   It can be used in irrigation

     Features of Series 4000 Flow Sensor model no [VAC- Series- 4000- Flow Sensor]

    1. It has low flow capabilities

    2. It is CE tested and approved by independent laboratory

    3. It has 4-20mA analog output programmable in field

    4. It has flow detection electronics that can be serviced or replaced without opening the pipe. No exposure to wetted parts

    5. It has documented operating service life in high temperature ultrapure water. Over 40 months of continuous 24hr/day operation

    6. It has particle sizes from 0.1 micron to 1.0 micron representing “on wafer” metallic contamination(ELYMAY) and liquid-born particles were monitored

    7. It has impeller bearings and shaft that can be easily replaced without removing the sensor from the pipe

    8. It has superior particle shedding performance verified by independent laboratory testing

    Specifications of Series 4000 Flow Sensor model no [VAC- Series- 4000- Flow Sensor]

    • Its size can range from 1/2 to 1 in.

    • Its working temperature range is Up to 220 °F

    • Its flow range is 0.25 to 20 ft/sec

    •  Its pressure range is Up to 350 PSI

    • Its accuracy is ±0.5 %

    We supply this Series 4000 Flow Sensor that can be used in various industries and applications in the United Arab Emirates. Contact us for this Series 4000 Flow Sensor in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman &  Fujairah too.

    Introduction

    The Sensor is available in 1/2 in. (12.70 mm), 3/4 in. (19.05 mm) and 1 in. (25.40 mm) pipe sizes, and a wide range of pressure and temperature specifications. It has a molded housing, rotating impeller, and externally mounted electronics housing using nonmagnetic sensing technology. The closed, six-bladed impeller design provides higher and more constant torque than four-bladed designs and is less prone to fouling by waterborne debris. The shape of the impeller and the absence of magnetic drag provide improved operation and repeatability even at low flow rates. The housing design allows the impeller, bearings, shaft, or O-rings to be cleaned or replaced without removing the sensor from the piping system. Two signal output options are available. One option is a square wave frequency proportional to the flow rate. Power for the circuit is provided by an external source through a three-wire shielded cable. An internal preamplifier allows the signal to travel a maximum of 2000 ft (609 m) without amplification, and 20 ft (6 m) of three-conductor cable is included. The second output option is a 4…20 mA current analog signal. Power is provided by the two-wire loop so the distance from the receiver is a function of power supply voltage and wire resistance. A maximum of 30 in. (762 mm) the connector cable is included. Sensors of similar types are interchangeable, so there is no need for recalibration after servicing or replacement.

    Applications of Series 4000 Flow Sensor model no [VAC- Series- 4000- Flow Sensor]

    1.   It can be used in petrochemical

    2.   It can be used in refining

    3.   It can be used in irrigation

     Features of Series 4000 Flow Sensor model no [VAC- Series- 4000- Flow Sensor]

    1. It has low flow capabilities

    2. It is CE tested and approved by independent laboratory

    3. It has 4-20mA analog output programmable in field

    4. It has flow detection electronics that can be serviced or replaced without opening the pipe. No exposure to wetted parts

    5. It has documented operating service life in high temperature ultrapure water. Over 40 months of continuous 24hr/day operation

    6. It has particle sizes from 0.1 micron to 1.0 micron representing “on wafer” metallic contamination(ELYMAY) and liquid-born particles were monitored

    7. It has impeller bearings and shaft that can be easily replaced without removing the sensor from the pipe

    8. It has superior particle shedding performance verified by independent laboratory testing

    Specifications of Series 4000 Flow Sensor model no [VAC- Series- 4000- Flow Sensor]

    • Its size can range from 1/2 to 1 in.

    • Its working temperature range is Up to 220 °F

    • Its flow range is 0.25 to 20 ft/sec

    •  Its pressure range is Up to 350 PSI

    • Its accuracy is ±0.5 %

    We supply this Series 4000 Flow Sensor that can be used in various industries and applications in the United Arab Emirates. Contact us for this Series 4000 Flow Sensor in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman &  Fujairah too.

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products

    To install this Web App in your iPhone/iPad press and then Add to Home Screen.