Product Image

BE44 Clamp Meter

BE44 Clamp Meter

Clamp meter, model no.VAC-BE44
AC and DC measuring range: 60- 1000A
AC accuracy: ±2.5%
DC accuracy: ±3%
AC voltage measuring range: 6- 750V
Accuracy: ±1.2%
DC voltage measuring range: 6- 1000V
Accuracy: ±0.8%
Resistance measuring range: 600- 60M Ω
Accuracy: ±3%
Protection class: IP20



    This combination does not exist.

    Contact Us

    Clamp meter for DC and AC measurements

    The 3 5/6- digit LCD display of the advanced Clamp meter is used for displaying results of AC and DC voltage and current, resistance and frequency measurements. With its contactless detection feature, the device is used for indicating alternating voltage, polarity and overloading, hence making the application measured safe for use. The rotary switch equipped in the device helps in selecting the mode of measurement. The integrated LED lamp makes the device useful in poor lighting conditions. With automatic power-saving features, the device’s battery capacity is ensured.


    1. The device is used for measuring AC and DC current.

    2. It is used for measuring AC and DC voltage.

    3. It is used for detecting alternating voltage.

    4. The clamp meter is used for polarity indications.

    5. It is used for indicating overload of the appliance.

    6. The device is used for measuring resistance.

    7. It is used for frequency measurements.

    8. The device is used for constant measurement of live cables in construction sites.

    9. It is used by electricians for wiring or detecting failures.

    10. It is used for measurement in running systems.

    11. The device can be used for both automatic and manual range measurements.

    12. The device can be used for checking the DC networks in an automobile.

    13. It is used for electrical purposes by mechanics.

    14. It is used for duty cycle measurements.

    15. It is used for continuity and diode tests.

    16. The device is used for tests of a car’s control system.

    17. It is used for indicating an electricity conducting field.

    18. It is used for detections and measurements of the required in poor lighting conditions.

    19. It is used for detecting cable breakage.


    1. The device measures AC and DC voltages for a large range.

    2. It measures alternating and direct current for a range up to 1000A.

    3. The device has features for resistance measurements. 

    4. It has frequency measuring features.

    5. It has a 1.8 inch LCD display for visible reading.

    6. The device has features for indicating polarity.

    7. It indicates overloading of the appliance.

    8. It indicates its battery status in the LCD display.

    9. It measures the duty cycle.

    10. It has features for showing the closeness to an electric field by a bar graph.

    11. The device has an integrated LED lamp for the application of the device in poor light conditions.

    12. It has features for changing the measuring mode from automatic to manual range selection.

    13. Clamp meter has a feature for power saving by automatic power off provision.

    14. The measurement feature can be selected using a rotary switch.

    15. It has a hold function.

    16. It has features for indicating the measurement ranges if it exceeds.

    17. It has functions for diode tests.

    18. The device has features for continuity checks.


    1. The AC voltage is measured for a range of 6 – 750 V.

    2. The DC voltage is measured for a range of 6 – 1000V.

    3. Alternating and direct current is measured for a range of 60 – 1000A.

    4. The device measures resistance ranging from 600 to 60M Ω.

    5. The device has connection sockets for 4mm safety connectors.

    6. The maximum diameter of the conductor for AC measurement is 38mm.

    7. The LCD display is 3 5/6 digit.

    8. The housing design is plastic. 

    9. The device is robust with a protection class of IP20.

    10. CAT III (1000V) is the circuit measuring category.

    11. EN 61010-1 is the safety prospect.

    12. The device is of 2nd degree pollution.

    13. The device must be operated in a surrounding condition ranging from 0 to 40 ℃.

    14. The device is run on internal batteries.

    15. The display must depict the measurement of the required function for the provided range

    16. It must contain a bar graph indicator in its illuminated display.

    17. The package must consist of measuring device, bag, batteries, safety measuring lines with test probe and an operating manual.

    18. The internal sensor of the device must measure and indicate AC and DC voltage and current, resistance, frequency, capacity and duty cycle.

    19. It must have an integrated LED lamp for easy operations.

    We supply these clamp meters for AC and DC voltage measurements in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply these clamp meters for alternating and direct current measurements in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.

    Our African offices supply these clamp meters for resistance, frequency, capacity and duty cycle measurements across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.

    Our Middle East offices supply these clamp meters for polarity and overloading detections in the United Arab Emirates, Kingdom of Saudi Arabia, Qatar, Oman, Kuwait, Egypt, Lebanon, Bahrain, Libya, Iraq, Erbil, Jordan, etc.

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products

    To install this Web App in your iPhone/iPad press and then Add to Home Screen.